How to cut polycarbonate solid sheet correctly?

Now polycarbonate solid sheet has become an inseparable decorative material in people's lives and can be seen everywhere. However, when decorating, polycarbonate solid sheet generally needs to be cut into corresponding specifications according to the drawings for installation. So today I will introduce the cutting method of polycarbonate solid sheet. Consumers often cut the boards and install things by themselves, but find that the cutting methods are all wrong. Let's talk about it below.

When cutting polycarbonate solid sheet, dust will generally be generated. At this time, water is generally put next to the electric saw. When the electric saw is cutting, the water will flow down all the time, so that the dust generated during cutting will not be scattered everywhere, and it is also convenient to clean up later. When sawing, you must be slow and maintain a balanced force to cut. When you are about to cut, you must be fast. The sawing mouth will be relatively flat and there will be no board corner cuts.

Another thing to note when cutting is that you must tighten the polycarbonate solid sheet or fix it. This can prevent vibration during cutting, which will cause uneven cutting and make it unusable. This also avoids friction between the surface of the endurance board and the table top to produce a rough processed surface.

This article was created by Chianess. If you have any product inquiries, please contact: simon@chiancess.com