The conditions for a ten-year warranty of imported raw materials for the production of polycarbonate sheetss

The quality assurance of polycarbonate sheets produced from imported raw materials is effective provided that the following conditions are met and maintained at all times:

The storage, transportation, processing, and application of polycarbonate sheets comply with the requirements of the product technical manual of Haining Chiancess Plastic Co., Ltd; When installing the polycarbonate sheets, the coated side should be placed inward, and the inclination angle between the panel and the horizontal after installation should be greater than 15 degrees; Chemicals that can react chemically with polycarbonate should be prevented from coming into contact with the board; The surface of the board coating should avoid scratches; The board should avoid any degree of hot forming processing; During the processing and installation of the polycarbonate sheets surface, direct contact with viscous substances should be avoided after removing the protective film; The surface of the board can only be gently sprayed with low-pressure water to clean the floating dust on the board surface.

The situation of not providing a ten-year warranty for the polycarbonate sheets

Despite meeting the prerequisites of the above warranty, this warranty will not be effective if any of the following situations occur or have occurred:

using solvents or high-pressure water to clean the board; Use rough materials such as hard sponges, fabrics, etc. to scrub the board; The surface of the board comes into contact with oily substances or cleaning agents; The protective film was not removed in a timely manner after the installation of the polycarbonate sheets; Encountering extreme weather conditions and natural disasters of any nature.

This article was created by Chianess. If you have any product inquiries, please contact: simon@chiancess.com